Spring Service

BOAT AND ENGINE COMMISSIONING

(included with Total Prevention Care Program) We charge and install your batteries, start engine and check all operating systems. We sea trial your boat in water and verify for proper W.O.T.R.P.M.'s, check all boat and engine gauges, check engine and systems warning alarms. Check and adjust steering torque, control cables and belt tension. Perform electrical systems evaluation including checking for proper operations of all electrical, bilge blower, bilge pumps, navigation lights, cabin and dash light and all electrical accessories. Salt water wash down, baitwell system, icemaker, air conditioning, 110 volt dockside power and test run generator. All are checked for trouble-free boating. (Parts additional)

Single O/B  to 28'.

Twin O/B  to28'.       

               over 28'. 

Single I/O & O/B

To 28'.
Over 28'.

Twin I/O & O/B

To 28'.
Over 28'.

Over 33'.
(Launch/Haul additional if not winter land stored with us)
(Water systems are additional)

ACCESSORY COMMISIONING SERVICES

1. Fresh Water Systems: Refill and flush with fresh water. Add Aqua Clear, activate and check for proper operation. Materials are extra charge. 2. Hot Water Heater.3. Head: Charge toilet and holding tank and check for proper operation (plus materials).

4. Zincs: inspect and replace as necessary, (Time and Materials).

6. All boats to be considered by Great Bay Marine are subject to the acceptance of one of the sales managers of Great Bay Marine.

BOTTOM PAINT - (includes materials)

Repainting - includes light scrapping and sanding, wiping down, tape waterline, and apply one coat of premium ablative paint.

Re-paint

Up to 9' beam.Over 9' beam.

Unpainted

Up to 9' beam.Over 9' beam.

Unpainted - Includes dewaxing, establishing and taping a waterline, priming and two coats of premium paint.

DRIVE TRAIN PAINT

We apply anti-fouling protective paint. This is recommended for in-water boats.
Includes all service materials.
Previously painted
I/O each.
I/B Twin.

HULL WAX ONLY

We wash and wax your hull sides, rub rail down to the chines. Includes all service materials.
Up to 9' beam - per foot.
Over to 9' beam - per foot.

WASH, WAX, & DETAIL

We wash, wax and detail your boat including hull sides and deck. We clean engine bilge area, clean glass and oil outside wood work. We also vacuum inside, clean and Amorall cockpit vinyl, polish rails and lubricate canvas snaps. Includes all service materials.
Up to 8'6" beam - per foot.
Over to 8'6" beam - per foot.
Over 10'6" beam - per foot.
Flybridge.
*Compounding hull sides if needed per foot.

WASH AND VACUUM

includes washing your boat exterior and cockpit, vacuum cockpit and cabin, clean the windshield and wipe down the cockpit vinyl with Armorall.
Up to 22'.
Over 22', call for quote.